Dynamic OG Image Generator

Most SEO plugins let you set a static image as your og:image. Dynamic OG Image Generator goes further: it takes a real browser screenshot of each page and uses that as the og:image. When someone shares your link, social platforms see exactly what your page looks like. Captures run in the background via WP-Cron. The plugin submits each job to the PlugUpp screenshot service, which renders at the 1200x630 Open Graph size and delivers the result back to your site. The cached image is injected as og:image, overriding your SEO plugin's output wherever a screenshot is available. You can also pick Featured image, Featured image with a screenshot fallback, or a Custom image from your Media Library, per content type and per individual post. Auto-screenshot is the standard choice; pick something else when you would rather use an image you already have.

Upgrade to Premium for custom post type and WooCommerce coverage, per-page capture overrides, country routing, retina captures, Media Library integration, and higher monthly screenshot quotas. One licence covers a single site up to unlimited sites. See plans and pricing

What you get on the free plan

• Real-screenshot og:image - actual browser captures at the standard 1200x630 Open Graph size, not templates and not featured-image fallbacks
• Per-post Image Source picker - choose Auto-screenshot, Featured image, Featured image with screenshot fallback, Custom image, or Off, from the block editor sidebar on each post
• Per-content-type Source defaults - set the default behaviour for Posts and Pages independently from the Settings page
• SEO plugin aware - works alongside Yoast SEO, Rank Math, and All in One SEO. The plugin replaces only the og:image and twitter:image tags; titles, descriptions, structured data, and sitemaps stay with your SEO plugin
• Page-builder content detection - edits made in Elementor, Beaver Builder, Divi, BeTheme, Oxygen, Themify, and Breakdance trigger the same auto-regen as a Block Editor save
• Bulk actions - set the Image Source for any selection of posts from the standard Posts and Pages list screens, including alongside any list filter (category, tag, Page Generator Pro, and similar)
• Automatic refresh schedule - cached screenshots refresh on a configurable interval (30 days by default), with a background sweep that cleans up cached images you no longer need after a 14-day grace
• Cache management - view cache size, clear all screenshots, or queue a full regeneration from the Dashboard
• Quota awareness - clear in-admin counters and status messages when your monthly allowance is approaching or has reached its cap

What Premium adds

• Custom post types and WooCommerce products - extend Image Source defaults and auto-screenshot capture to any public CPT, including WooCommerce products
• Per-page capture overrides - viewport width, capture delay, hide selectors, scroll-into-view, click-before-capture, dark mode, and country routing on individual posts from the block editor sidebar
• Country routing - capture each page as it renders from a chosen region for IP-localised content
• Retina captures - 2x or 3x device scale factor for sharper share previews
• Media Library integration - save each capture as a Media Library attachment, optionally set it as the post's Featured Image, and delete the previous capture on regenerate
• Higher monthly screenshot allowance - for larger or busier sites
• Multi-site licensing - one licence covers 1, 3, 5, or unlimited sites (Personal, Pro, Business, Agency)
• Email support

See the full plan comparison and pricing.

1. Install from the WordPress.org plugin directory (Plugins > Add New), or upload the plugin ZIP (Plugins > Add New > Upload).
2. Activate the plugin.
3. Open OG Images > Settings and pick an Image Source default for Posts and Pages. Auto-screenshot is the standard choice; pick a different mode when you have featured images you would rather use as the og:image.
4. Screenshots begin generating in the background as WP-Cron fires.

No API key or additional account is required. The plugin authenticates with the PlugUpp screenshot service automatically using your licence.

2.4.0

• New: Image source picker. Pick how each page's og:image is sourced - Auto-screenshot (the previous default), Featured image, Featured image with screenshot fallback, Custom image from your Media Library, or Off - per post from the block editor sidebar, and per content type from the Settings page. Featured and Custom modes do not consume your screenshot quota.
• New: top-level OG Images menu. Settings live under OG Images > Settings instead of the previous Settings > Dynamic OG Images path. New Dashboard sub-page shows plan and quota at a glance, plus recent activity, pending captures, and failed captures with reasons.
• New: bulk Image Source actions on the Posts and Pages list screens. Five variants - Auto-screenshot, Featured image, Featured image (with screenshot when missing), Off, and Reset to default - replacing the previous Enable / Disable / Reset trio.
• New: featured-image dimensions warning in the block editor sidebar. When the chosen Featured or Custom image is below 200x200 (the floor where major social platforms start skipping thumbnails), the sidebar flags it inline. No behaviour change, just a heads-up.
• Changed: cached screenshots are automatically cleaned up when no longer used. When a post's resolved Image source is no longer Auto-screenshot or Featured-with-fallback, the cached file is kept for a 14-day grace period and then deleted by a weekly background sweep. Flip back inside the grace window and the cache is preserved with no quota burn.
• Changed: screenshot quota is only used when the resolved Image source actually needs a screenshot. The daily refresh sweep, Regenerate All, post-update auto-regen, and the block editor Regenerate Now button all skip posts in Featured / Custom / Off modes (and Featured-with-fallback posts that already have a Featured image).
• Migrated: existing installs keep their previous Enable Sitewide setting on upgrade. Posts and Pages that were Enabled before 2.4.0 map to Auto-screenshot; Disabled maps to Off. Per-post overrides are preserved.

2.3.0

• Fixed: the Dynamic OG Image sidebar widget now appears on every public custom post type in the Premium build, not only the ones ticked under Settings > Custom post types. The override surfaces (sidebar widget, REST meta, bulk actions) work the same way Posts and Pages do - the sitewide tick controls automatic processing, but the per-post override capability is always available. Customers can now opt in individual items on a CPT (e.g. one specific Product) without having to enable the whole CPT for the sweep.
• Added: a dismissible notice when Page Generator Pro is detected on the same site. PGP-generated pages draw from the monthly screenshot quota along with hand-written content, which on large catalogues can exhaust the allowance silently. The notice links to a new capacity-planning guide covering post-type exclusions, refresh intervals, and per-page overrides for high-page-count sites.

2.2.1

• Refined: small layout polish on the Custom post types row of the Settings page - each available type now sits on its own line for legibility, matching the Posts and Pages checkboxes above.

2.2.0

• Changed: the "Enable sitewide" setting is now split into separate "for Posts" and "for Pages" checkboxes. Sites usually want to treat Posts (which often have featured images already) differently from Pages (bare landing pages where the screenshot is the differentiator); the split lets you opt one in and leave the other off. Existing sites are migrated automatically - whatever your previous "Enable sitewide" setting was, both new checkboxes inherit it on first load. Both still default to off on fresh installs so a new site never starts consuming quota before you have consciously opted in.
• Added: bulk actions on the standard Posts and Pages list screens (Bulk actions dropdown). Three actions: "Enable Dynamic OG image", "Disable Dynamic OG image", and "Reset Dynamic OG to default". Select any number of rows - including the full set produced by a built-in or third-party list filter, such as a category, tag, or Page Generator Pro's filter - and apply the action across all of them in one click. Drives the same per-post override the OG Image panel in the block editor writes to, so the two stay in sync.
• Added (Premium): support for additional public custom post types. A new "Custom post types (Premium)" row in the Enable-sitewide section lists every public custom post type registered on your site (WooCommerce products appear automatically when WooCommerce is active). Tick a type to bring it into scope: the block editor sidebar, the bulk actions, the daily refresh sweep, and the Regenerate All button all extend to it immediately.

2.1.3

• Fixed: on Yoast SEO sites where the page already had its own OG image (a featured image or a Yoast-set Open Graph image), the 2.1.2 fix added a second og:image tag instead of replacing the existing one. Pages ended up with two og:image meta tags pointing at the same screenshot URL but reporting different width/height values, which is invalid Open Graph markup and confuses social-preview scrapers. The plugin now adds the screenshot to Yoast's image collection only when Yoast has no image of its own, and otherwise rewrites the existing one. Exactly one og:image tag is emitted per page in either case.
• Fixed: og:image:width / og:image:height / og:image:type tags now consistently report 1200, 630, and image/webp under Yoast (matching the actual screenshot dimensions and format). Previously, when Yoast had its own image with different dimensions, those dimensions were left in place after the URL was rewritten to ours.

2.1.2

• Fixed (critical): the og:image tag was missing entirely on sites using Yoast SEO when no other og:image was set for the page. Yoast's rewrite-only filter only modifies an existing og:image and does nothing when no image is present, so on pages with no featured image and no Yoast default the og:image tag did not ship at all. Result: Facebook, LinkedIn, Slack, WhatsApp and Discord previews showed no image even though the screenshot existed. The plugin now adds the screenshot to Yoast's internal image collection directly so the tag is guaranteed to ship. Rank Math and All in One SEO were not affected by this specific issue.
• Added: a new "Scheduled refresh" checkbox on the Settings page. When off, cached screenshots are kept indefinitely until you explicitly regenerate them (per post or via Regenerate All Screenshots). Post-update auto-regen still works when its own setting is enabled. Defaults to on, so existing installs keep their current schedule-driven behaviour.
• Changed: the setup banner shown before plugin activation now branches between two states. After you click "Allow & Continue" but before clicking the confirmation link in the email, the banner now reads "Check your email to finish setup" with a Refresh button - so you are not asked to "Activate now" again when you are already waiting on your own inbox.
• Changed: the setup banner icon is now a WordPress dashicon to match the visual style used across other PlugUpp plugins.

2.1.1

• Compliance: addressed four Plugin Check ERROR-severity findings on the 2.1.0 build. Two missing translators: comments on the live screenshot-usage headline strings, and two output-escape annotations on integer values in the Refresh interval helper text. The values were already integer-cast; this re-casts at the printf call site so the static analyser sees the safety explicitly. No customer-visible change.

2.1.0

• First public release on the WordPress.org plugin directory.
• Real screenshot-based og:image. The plugin captures a real browser screenshot of each page at the standard 1200x630 Open Graph size and uses it as the og:image. No templates, no featured-image fallbacks - the actual page is what social platforms see when your link is shared.
• No third-party API key. The plugin connects to the PlugUpp screenshot service automatically using your licence. No separate account to manage and no per-request signup.
• Per-post controls in the Gutenberg sidebar - per-page enable/disable, live status, thumbnail preview of the current capture, and a "Regenerate Now" button. Premium adds per-page overrides for viewport width, capture delay, hide selectors, scroll-into-view, click-before-capture, dark mode, country routing, and Media Library integration.
• Page-builder content-save detection. Edits made in Elementor, Beaver Builder, Divi, BeTheme (Muffin Builder), Oxygen, Themify Builder, or Breakdance trigger the same auto-regeneration as a Block Editor save. Two filters (doig_supported_builders and doig_render_affecting_meta_keys) let site owners add their own.
• Works alongside Yoast SEO, Rank Math, and All in One SEO via each plugin's own image filter hooks. Other meta tags (titles, descriptions, structured data, canonicals, sitemaps) stay under your SEO plugin's control. The plugin runs without an SEO plugin too, emitting its own og:image and twitter:image block.
• Configurable fallback image - your SEO plugin's default, a custom image from your Media Library, or none - shown while a screenshot is being generated or for posts that have not yet been captured.
• Configurable refresh schedule (default 30 days) with a background daily sweep, optional auto-regeneration on post update, and a manual "Regenerate All Screenshots" action on the Settings page (with a backup-recommendation warning before bulk operations).
• HTTPS pre-flight check with an actionable message when the WordPress Site Address is misconfigured as http://. Prevents silent capture failures that would otherwise consume quota for no result.
• Asynchronous capture pipeline. Jobs are delivered via a signed callback with a polling fallback for hosts that block inbound callbacks. On PHP-FPM hosts the callback handler uses fastcgi_finish_request() to return in single-digit milliseconds even under bulk-regeneration load.
• Live screenshot-usage section on the Settings page showing your current startup count, monthly count, quota-reset date, and subscription-renewal date. Figures come from the screenshot server live so they always match reality.
• Cache management on the Settings page - cached file count, total disk usage, "Clear Entire Cache", and "Regenerate All Screenshots" with the bulk-operations safety warning.
• Quota awareness. Posts that would exceed the monthly cap are marked with a quota_exceeded status and re-queued automatically when the quota resets at the start of your next billing period. Existing screenshots continue to be served in the meantime.
• Documentation links throughout the plugin UI. The Plugins admin row, the Settings tab, and the Logs tab all link out to context-relevant pages on the public documentation site at https://docs.plugupp.com/dynamic-og-image-generator/.